High density high alumina ceramic refractory brick

Brief IntroductionHigh alumina corundum brick/high alumina lining brick for ball mill in ceramics industry, cement industry and paint. They allow for a constant use over an extended period of time without any routine maintenance. With small wear loss and high density, alumina grinding media, this product was extensively used in

Featured Products

Brief Introduction

High alumina corundum brick/high alumina lining brick for ball mill in ceramics industry, cement industry and paint. They allow for a constant use over an extended period of time without any routine maintenance. With small wear loss and high density, alumina grinding media, this product was extensively used in petrochemical, metallurgy, thermoelectricity industry, mix and crush procedure of ceramics, porcelain enamel. glass, glaze and frits, chemical and plastic industries, etc. 

 

Features

1. Extremely hard, outstanding abrasion properties, none-contamination, improve the stability of the grinded material, especially for ceramic enamel material.

2. The application of the alumina balls and lining brinks can dramatically increase the grinding surface and space, therefore improve the grinding efficiency.

3. Long-lasting working time.  


Performance Index:
Item/ProductHA 92HA 95ZTA
AL2O3(%)92±0.595±0.576±0.5
ZrO2(%)  20
Bending Strength(MPa)> 220> 280> 400
Fracture Toughness(MPam 1/2)> 3.60> 3.90> 4.50
Rockwell Hardness(HRV)> 82> 88> 90
Wear Volume(cm³)< 0.50< 0.30< 0.15
Density(g/cm³)> 3.60> 3.70> 4.10
Size details
SizeLength(mm)Width(mm)Thickness(mm)Shape
10x1010101.5-10Mosaic/hexagonal
11.55x11.5511.5511.553-12Mosaic/hexagonal
12x1212123-12.7Mosaic/hexagonal
17.5x17.517.517.54-10Mosaic/hexagonal
20x2020205-15Mosaic/hexagonal
25x2525255-15Mosaic/hexagonal
50x2550255-10Plain Tile without hole
50x5050505-15Plain Tile without hole
100x1001001006-15Plain Tile with or without hole
150x1001501006-100Plain Tile with or without hole

High Density High Alumina Ceramic Refractory Brick
Application
SystemApplication
Coal conveying systemCoal conveying pipeline
Belt joint hopper
Coal hopper
Raw coal hopper
Coal feeder
Coal pulverizing systemCoal mill drum
Chute and hopper lining
Outlet pipeline
Primary air pipe and elbow
Pulverized coal pipe and elbow
Burner pipeline
Dust removing/disposing systemDust removing pipe and elbow
Fine fly ash pipe
Slay removal
Dry ash pipe
Limestone crushing and raw fuel pre blending systemChute
Hopper
Raw fuel grinding, homogenization and storage systemVertical mill feed chute
Vertical mill air-intake lining board
Vertical mill scraper plate
Separator
Cyclone
Fan impeller and shell
Mill outlet elbow and expansion joint
Firing systemTertiary air duct
Elbow of the inlet or outlet of humidifier tower
Elbow from grate cooler to electrostatic precipitator
Kiln head electrostatic precipitator tail air pipe elbow
Discharge
Cement grinding systemVertical mill feed chute
Mill outlet elbow and expansion joint
In mineral processing industry
systemApplication area
Materials conveying systemConcentrate pipeline
Tailing pipeline
Backfill mineral
Grinding systemChute and hopper lining
Outlet pipeline
Mineral processing systemVibrating chute
Cyclone
Entrifugal dehydrator
In steel industry
SystemApplication area
Material conveying systemHopper
Bunker lining
Mixing bine
Compounding ingredients systemPrimary mixing drum
Secondary  mixing drum
Sintered materials conveying systemMineral processing hopper under vibrating screen
Long distance mineral processing hopper and bunker
Dust removal and discharge systemDust removing pipe
Dust collecting pipe
Machine tail dust removing pipe
In coal preparation industry
SystemApplication area
Conveying systemMedium conveying pipeline
Coal washery equipment feeding pipeline
Coal washery equipment discharge pipeline
Non-pressure gravity flow pipeline
Coal washery conveying pipeline
Mining equipmentHorizontal screen bowl centrifuge
Horizontal vibratory screen centrifuge
Horizontal coal slurry scroll/screen centrifuge
Automatic flocculent make-up system
cyclone

High Density High Alumina Ceramic Refractory BrickHigh Density High Alumina Ceramic Refractory Brick

Advantages:
Low wear loss and long working life.
Good impact resistance.
Good corrosion resistant
Good thermal shock resistance.
Smooth surface and good adherence resistance.
Quick installation and good service after sale.
Complicated shape and various size designed according to customers' demands.


Service:
Any requirment about  Alumina Ceramic Square Mosaic Tile , Wear Ceramic Liner Vulcanized Into Rubber and wear resistant ceramic product Backing, Alumina ceramic wear lining tiles and Wear Resistant Rubber Ceramic Panels, please feel free contact us and we'll afford you the most suitable product and best service.

High Density High Alumina Ceramic Refractory BrickHigh Density High Alumina Ceramic Refractory BrickHigh Density High Alumina Ceramic Refractory BrickHigh Density High Alumina Ceramic Refractory BrickHigh Density High Alumina Ceramic Refractory BrickHigh Density High Alumina Ceramic Refractory BrickHigh Density High Alumina Ceramic Refractory Brick

FAQ
Q: How is your goods quality?
A: We cooperated with seveal famous companies, like Mitsubishi; Media; Toshiba; Philips; Flyco;etc.
Q: Do you provide customized service?
A: Yes, we have a professional team which has rich experience in industrial ceramics,so we'll try to satisfy your requirement.
Q: Can you supply customize service?
A: Yes, we are a professional manufacturer of Steatite and Alumina Ceramics and are customized smoke according to your needs.
Q: What is your main product?
A: Our Main Products include Ceramic Band Heater Insuator;Industrial Ceramics;Textile Ceramics;Ceramic Blocks;Ceramic Connectors;Alumina Ceramics;Laser Ceramics;Thermostat Ceramics;Steatite Ceramics;Cordierite Ceramics;Customize Ceramics;MgO Tubes;
Q: How does your facility implement quality control?
A: Quality is the most important We always attach great importance to quality control, from beginning to end. We have QC
department to carry out the inspection before shipping.
Q:Can the products be customized as our need, such as the special design or putting on our logo?
A:Surely, our ceramic parts can be customized as your need or drawings. Putting on your logo is also available.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours