We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.
In a study recently published in the Journal of the European Ceramic Society, a unique method of using nanoparticle-stabilized ceramic foams with boehmite in conjunction with silica as a dual-phase sol to produce mullite ceramic foams has been presented.
Study: Mullite ceramic foams with tunable pores from dual-phase sol nanoparticle-stabilized foams. Image Credit: socrates471/Shutterstock.com
Nanoparticles (NPs) help increase the specific surface area of ceramic foams. The mullite ceramic foams produced have hierarchical pores, better compression strength, and a high level of open porosity.
Mullite (3Al2O3.2SiO2), as a stable compound, has been used frequently as a refractor and a structural material for high-temperature applications owing to its superior properties such as high melting point, low creep rate, minimal heat conduction, and strong resistance to thermal shocks.
Due to its small dielectric constant, Mullite is also a good electronic circuit substrate. On the other hand, its conventional compact structure hinders the development of certain characteristics and limits its potential applications.
Adding a high porosity to mullite ceramics might give them unexpected properties, including small volume density, high specific area, decreased heat conduction, and reduced dielectric constant. Aerogels made from mullite nanofibersare better suited for lightweight insulating substances.
Owing to the open porous structure of mullite, ceramic foams have been extensively used as high-temperature gas and fluid screens, separation films, and catalyst supporters.
Porous mullite ceramics have been manufactured using various techniques, such as reactive sintering, freeze-casting, foams or emulsions template, adding pore former method replica, gel-casting, and 3D printing.
Unfortunately, barely any products manufactured using these processes yield more than 80% porosity. It is crucial to develop a successful process for fabricating high porosity mullite ceramic foams without sacrificing compressive strength, but it remains difficult.
Lately, nanoparticle-stabilized foams have been produced using sol-NPs. In contrast with traditionally employed micro-scale ceramic particles, sol-NPs are much more beneficial for foam stability, the creation of pored ceramics with layer-thin walls and small grain sizes, yielding greater compressive strength based on high porosity.
Moreover, the specific area of ceramic foams is also increased, which might be related to improved frittage reactivity and partial frittage.
As a result of partial frittage, the use of NPs would form open pores on the cell membrane. The interconnectivity of open pores will increase the available surface area and porosity, making it suited for use as filters, catalytic supports, and biological scaffolding. These characteristics may be regulated by adjusting the concentrations of surface modifiers, which would modify the electrostatic interaction energy between air bubbles and colloidal particles and, as a result, alter the characteristics of the foams.
Thus far, single-phase sol has already been used effectively to generate nanoparticle-stabilized foams, including alumina and silica. However, the properties of the porous mullite ceramic foams produced do not satisfy the expectations of highly porous structure, homogeneity, and reduced pore diameter.
Dual-phase sol-NPs as building blocks for nanoparticle-stabilized foams might be promising for addressing this issue, resulting in an optimum porosity microstructure combined with mechanical qualities following reaction frittage.
Still, because of the disparity between particle surface states, obtaining stable foams through dual-phase sol is more complex than single-phase sol.
The research suggests a simple, straightforward, and inexpensive method for producing mullite ceramic foams using foams supported by dual-phase sol NPs.
The sol NPs were modified to make their surface hydrophobic. By varying the frittage temperature and solid loading, the researchers created mullite ceramic foams with hierarchical pores, increased porosity, significant compression strength, and reduced heat conduction.
Using sol NPs with constant surface charge and pH levels is preferable to guarantee homogenous blending of dual-phase sol without aggregation. As a result, the starting ingredients were boehmite sol with an initial pH level of 6.2 and silica sol having a comparable pH of 4.3.
The pH was increased to a range of 5.0-6.0, which improved foam stability and promoted the creation of gel networks, resulting in optimal rheological properties.
For the first time, boehmite sol and silica sol were used as the dual-phase sol to construct nanoparticle-stabilized foams, and mullite ceramic foams with hierarchical porosity were created.
To increase foam stability, pH was changed in the foaming procedure to promote the gelling of dual-phase sol NP-stabilized foam.
Mullite ceramics were found to have increased compression strength while having low heat conduction, making them suitable for use as filters, catalytic supports, and thermal insulation.
Continue reading: Why is Understanding the Rheology of Nanofluids Important?
Yang J, Z. X. (2021) Mullite ceramic foams with tunable pores from dual-phase sol nanoparticle-stabilized foams. Journal of the European Ceramic Society. Available at:https://www.sciencedirect.com/science/article/pii/S095522192100902X?via%3Dihub
Disclaimer: The views expressed here are those of the author expressed in their private capacity and do not necessarily represent the views of AZoM.com Limited T/A AZoNetwork the owner and operator of this website. This disclaimer forms part of the Terms and conditions of use of this website.
Shaheer is a graduate of Aerospace Engineering from the Institute of Space Technology, Islamabad. He has carried out research on a wide range of subjects including Aerospace Instruments and Sensors, Computational Dynamics, Aerospace Structures and Materials, Optimization Techniques, Robotics, and Clean Energy. He has been working as a freelance consultant in Aerospace Engineering for the past year. Technical Writing has always been a strong suit of Shaheer's. He has excelled at whatever he has attempted, from winning accolades on the international stage in match competitions to winning local writing competitions. Shaheer loves cars. From following Formula 1 and reading up on automotive journalism to racing in go-karts himself, his life revolves around cars. He is passionate about his sports and makes sure to always spare time for them. Squash, football, cricket, tennis, and racing are the hobbies he loves to spend his time in.
Please use one of the following formats to cite this article in your essay, paper or report:
Rehan, Shaheer. (2021, December 07). Unique Method to Generate Stabilized Mullite Ceramic Foams from Nanoparticles. AZoNano. Retrieved on April 02, 2022 from https://www.azonano.com/news.aspx?newsID=38327.
Rehan, Shaheer. "Unique Method to Generate Stabilized Mullite Ceramic Foams from Nanoparticles". AZoNano. 02 April 2022. <https://www.azonano.com/news.aspx?newsID=38327>.
Rehan, Shaheer. "Unique Method to Generate Stabilized Mullite Ceramic Foams from Nanoparticles". AZoNano. https://www.azonano.com/news.aspx?newsID=38327. (accessed April 02, 2022).
Rehan, Shaheer. 2021. Unique Method to Generate Stabilized Mullite Ceramic Foams from Nanoparticles. AZoNano, viewed 02 April 2022, https://www.azonano.com/news.aspx?newsID=38327.
Do you have a review, update or anything you would like to add to this news story?
AZoNano speaks with Graphmatech, a Swedish-based company about their approach to making graphene more industrially accessible to unleash this wonder material's full potential.
AZoNano speaks with Dr. Gatti, a pioneer in the field of nanotoxicology about her involvement in new research that examines a possible link between nanoparticle exposure and sudden infant death syndrome.
AZoNano speaks with Professor Kenneth Burch from Boston College. The Burch Group has been investigating how wastewater-based epidemiology (WBE) could be used as a tool for real-time information on the consumption of illicit drugs.
The Filmetrics® F54-XY-200 is a thickness measurement tool created for automated sequence measurement. It is available in various wavelength configuration options, allowing compatibility with a range of film thickness measurement applications.
Automated Film Thickness Measurement Mapping Instrument – F54-XY-200
Hiden’s XBS (cross beam source) system allows for for multiple source monitoring in MBE deposition applications. It is used in molecular beam mass spectrometry and allows in-situ monitoring of multiple sources along with real-time signal output for precise control of the deposition.
AZoNano.com - An AZoNetwork Site
Owned and operated by AZoNetwork, © 2000-2022