(Photo : Tim Mossholder on Unsplash)

A vehicle's catalytic converter is one essential component of the vehicle's exhaust system. A Cat converter is an emission control device that is mounted in cars. It causes the chemicals that come off from the car's engine to break down into harmless compounds from the exhaust before they are released into the atmosphere.

But sometimes, it can be clogged up and cause your car not to run effectively. This is because it collects lots of dirt and particles from the engine, which simply means that it needs cleaning after it gets clogged. Failure to clean your cat when it gets clogged can damage it entirely and you don't want it because replacement is more expensive considering how high the catalytic converter price can be.

Even second-hand or the scrap value for a catalytic converter can go as high as $1000 off cause this will depend on the type of vehicle you own. But before getting to how you can clean your car catalytic converter, let's first see if a catalytic converter can unclog itself? Keep reading to find out.

Generally, a clogged cat cannot unclog itself. Though the only way a cat converter sometimes can unclog itself is via driving long at a particular level of high RPMs. Since you have to sustain it for very long, it will be nearly impossible to happen without any effort on your part.

However, in case you intend to give it a try, look for a highway where you can drive without having any interruption. Just make sure to keep the car at 2500-3000 RPMs for at least half an hour. 

The way to clean a dirty converter isn't by taking it off, it can be cleaned with a liquid solution. The method also helps clean the exhaust system and the vehicle's fuel system and oxygen sensors.

But note that this technique won't work well if the exhaust system happens to be too dirty or the catalyst honeycomb is already broken. So to verify that this cleaning method will work perfectly well for you, you should tap the converter with a mallet or wrench. Then hit it hard enough to rattle it, though it shouldn't be done in such a way it will break.

So in case you hear rattling on the inside, then know that you may have broken components or heavy sediments. This can only be fixed by removing and cleaning the converter.

So in case you don't hear any strange sounds, then you should proceed with the following steps:

Get catalytic converter cleaner and fuel. You need to purchase some fuel in a can and one of the catalytic converter cleaners listed above that's compatible with your vehicle. Note that some cleaners only work with diesel or gasoline engines, while others work with both.

Now pour the cleaner into your fuel tank. Note that the label on the cleaner will have all the instructions required regarding the quantity you should pour and how much fuel is needed in the vehicle.

Then drive the car. After you must have added the solution, you can start the vehicle engine and drive. As you drive, it will circulate the cleaner and clean the entire exhaust system. The cleaner's label will state the length of your driving for the best results.

But I recommend you drive with an RPM over 3000 so that the catalytic converter can be hot enough to burn out clogs and residue. If you use an automatic transmission, it's a good idea to shift it into sports mode.

But if you use stick shifts, you can keep it in each gear a bit longer before shifting it to the next gear. Ensure that you concentrate on your vehicle's temperature gauge to ensure it doesn't overheat.

If the cleaning process succeeds, you'll observe less exhaust smoke, faster acceleration, and fewer engine misfires. You may also want to explore how to clean a cat without removing it if you are like me, who does not like removing the catalytic converter from the vehicle when cleaning it.

Suppose you want to clean various vehicle parts such as the Oxygen sensors, cylinder heads, catalytic converter, and fuel injectors. In that case, you'll need to use a proper cleaning solution that will do an excellent and better job.

The cat converter cleaner will allow your vehicle to run smoothly and quickly and prevent any problem with emissions. If you have a clogged catalytic converter in your car, specifically from carbon, then the best option is to replace the catalytic converter. But if you want to clean, then below is how to use catalytic converter cleaner.

 First off, start by taking out the cat cleaner seal from the bottle. You will then need to empty the container into the gas tank of your car.

Drive the car for at least 15 minutes. This will allow the cleaner to reach every part of the car.

To allow the cleaner to blend well with your fuel, you must have 1/3 of your gas tank.

If your vehicle has fault codes, you should take it for at least 30 minutes to reset its OBDII.

You must carefully observe and monitor the steps. After cleaning the catalytic converter because sometimes for cat cleaner to kick in it can take some time for the cleaning solution that passes through the catalytic convert thoroughly.

It may take around 30 minutes for the cleaner solution to get to all parts of the vehicle after being poured into the tank. To ensure a successful operation, make sure to ride the car for at least one mile. 

 Bear in mind that the cleaner solution can take a few minutes for the cleaner solution to get through the catalytic converter completely. You may need to run your car for  30 minutes because about the time it takes the cleaner solution, once it has been poured into the tank, to reach all parts of the vehicle. To ensure a successful operation, make sure to ride the car for at least one mile. 

As you use your vehicle every day, there's a possibility that it will lead to the gradual accumulation of carbon deposits all through your engine and exhaust system. This means that you need to clean it. To clean it, below are Catalytic converter cleaning services in the US.

 You can give your engine the deep cleaning it deserves by using the state-of-the-art decarbonizing station from Carbon Cleaning US.

The technician you will find at the Carbon Cleaning US office will remove nearly all carbon buildup in your cat converter and your engine, and in less than 30 minutes, your engine will run like new.

 Note that the machine found in this company has a remarkable cleaning capacity. This is because they have an advanced technology that was developed over several years of work. This machine can burn off up to 75% of the carbon deposits in your cat converter that prevent your engine from running perfectly.

So before you replace your cat converter, try Carbon Cleaning. 

The Rislone happens to be the original premium automotive chemical company that was established in 1921. This brand of cat cleaner has gained popularity over the past years in the international market with over a century of innovative experience and millions of loyal customers. 

They have continued to evolve in the industry's automotive technological changes to work in the complete line of products for the automotive market.

They have a machine that can take off up to 80% of the carbon found in your cat converter so that your engine can have peak performance. You can visit www.rislone.com. More can be found here in this post on catalytic converters cleaners, where autovfix.com shared 8, additional cat converter cleaners you may want to consider.

The cat converter is an integral part of your vehicle's exhaust system. Once it gets clogged or faulty, it will be necessary to unclog it to restore its duty before it causes more damage.

A cleaning solution is needed to remove most of the unburned fuel to get it unclogged. But if the catalytic converter happens to be severely damaged, I recommend you get it cleaned or get a new one to preserve your car's engine.

Sign up for our free newsletter for the Latest coverage!