We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.
Biomimetic structural design offers advantages for the development on flexible lithium-ion batteries, and a study published in Energy Storage Materials has demonstrated the novel design of a device inspired by crocodile skin.
Study: Crocodile skin inspired rigid-supple integrated flexible lithium-ion batteries with high energy density and bidirectional deformability . Image Credit: PhotoSky/Shutterstock.com
Flexible batteries are a key technology in the field of flexible and wearable electronics. The design of these devices has been extensively investigated by several researchers over the past decade, with different device architectures and materials developed and explored.
The world is currently going through what has been widely termed the fourth industrial revolution. Amongst the technological advances that are promising to disrupt society, flexible, wearable devices such as sensors, biomedical devices, displays, and telecommunications devices have been the subject of intense research in recent years.
Wearable devices must possess good mechanical deformity and electrochemical and material properties. For this reason, every part of them must be fully flexible and able to withstand significant mechanical stress whilst retaining superior electrochemical performance.
Lithium-ion batteries have shown great promise as energy storage components for flexible devices due to being lightweight and possessing a long cycle life and higher power output. However, most currently available lithium-ion batteries on the market do not have the required flexibility and ability to withstand mechanical deformation whilst retaining satisfactory electrochemical performance.
Whilst several fully flexible lithium-ion batteries are in the research and development stage and new materials have been widely explored, issues with the devices persist which hinder their widespread commercial application. Repeated deformation of these batteries can accelerate mechanical failure.
For instance, interface delamination can occur between the current collector and the active layer. This can lead to fluctuations in power output and cause short circuits and other safety and degradation issues.
To overcome these issues, several strategies have been proposed to develop robust flexible lithium-ion batteries. Materials which possess elastic, soft, and stretchable properties have been developed. These include solid electrolytes, super slim electrodes, and carbon-based current collectors.
Moreover, there has been research focus on developing batteries with novel architectures that can withstand deformation, such as wavy 2D structures, origami, micro-honeycomb, and soft serpentine structures. Despite being able to handle mechanical deformation without damage, they suffer from reduced energy density.
More from AZoM: Particle Analysis Applied to Additive Manufacturing Feedstocks
Recent advances in the field of flexible battery development have aimed to design devices with a two-part structure that separately hold deformation and energy storage functions. Researchers have developed accordion-like, zigzag-shaped, and knee-joint mimicking structures.
Whilst these devices possess both superior flexibility and energy density, they cannot achieve bidirectional deformability, which occurs in the real world due to folding, winding, and stretching. Wearable devices require both high energy density and multi-direction flexibility.
Designing a fully flexible lithium-ion battery which can withstand multi-directional deformation whilst retaining superior electrochemical properties such as high energy density is a key concern within current research in the field of wearable electronics.
Writing in Energy Storage Materials, the authors behind the new study have presented an approach that can overcome these issues. They have presented a novel design inspired by crocodile skin. Crocodiles have evolved to be apex predators over the course of millions of years. This is in part due to their armor.
Crocodile skin is tough but flexible. Scutes are the bony ridged plates (scales) that make up this tough skin and possess a bony base. Arrays of rigid scutes connected by soft dermis occur all over the body, including at points that undergo significant levels of mechanical deformation, such as shoulders and joints.
The proposed rigid-supple integrated flexible lithium-ion batteries in the research can be coiled directly from a stacked and tailored electrode sheet using a winding machine. Two adjacent electroactive parts in the row direction are connected by diagonal joints, and there is an interspace between adjacent parts. The design allows for greater bidirectional bending compared to conventional high-density flexible lithium-ion batteries.
Superior energy storage capacity is offered by the thick, winding electroactive parts. Results of the study demonstrated a superior energy density of 400.2 Wh L-1. The energy density of the design reaches 91.76% of conventional non-flexible lithium-ion batteries with the same geometric volume and materials. Performance over two hundred charge/discharge cycles was also good, with a 92.3% battery capacity retention under multiple deformations, up to 30,000 bidirectional bending/folding.
After 13,000 dynamic bending test cycles, the battery’s discharge capacity exceeded 151.9 mAh g-1. Finite element analysis revealed the device’s electrode protection mechanism. Results demonstrated that most of the mechanical stress was borne by the supple interconnected joints, and the maximum principal stresses of the proposed device were significantly smaller than conventional prismatic lithium-ion cells under the same bent state.
In addition, the authors have stated that the proposed design is highly customizable due to the ability to adjust multiple geometric parameters. The crocodile skin-inspired flexible lithium-ion battery presented in the study shows enormous potential for use in technologies such as wearable devices, flexible displays, and soft robotics.
Liu, G et al. (2022) Crocodile skin inspired rigid-supple integrated flexible lithium ion batteries with high energy density and bidirectional deformability [online] Energy Storage Materials [pre-proof] sciencedirect.com. Available at: https://www.sciencedirect.com/science/article/pii/S2405829722000691
Disclaimer: The views expressed here are those of the author expressed in their private capacity and do not necessarily represent the views of AZoM.com Limited T/A AZoNetwork the owner and operator of this website. This disclaimer forms part of the Terms and conditions of use of this website.
Reg Davey is a freelance copywriter and editor based in Nottingham in the United Kingdom. Writing for AZoNetwork represents the coming together of various interests and fields he has been interested and involved in over the years, including Microbiology, Biomedical Sciences, and Environmental Science.
Please use one of the following formats to cite this article in your essay, paper or report:
Davey, Reginald. (2022, February 14). Lithium-ion Batteries Inspired by Crocodile Skin. AZoM. Retrieved on August 26, 2022 from https://www.azom.com/news.aspx?newsID=58226.
Davey, Reginald. "Lithium-ion Batteries Inspired by Crocodile Skin". AZoM. 26 August 2022. <https://www.azom.com/news.aspx?newsID=58226>.
Davey, Reginald. "Lithium-ion Batteries Inspired by Crocodile Skin". AZoM. https://www.azom.com/news.aspx?newsID=58226. (accessed August 26, 2022).
Davey, Reginald. 2022. Lithium-ion Batteries Inspired by Crocodile Skin. AZoM, viewed 26 August 2022, https://www.azom.com/news.aspx?newsID=58226.
Do you have a review, update or anything you would like to add to this news story?
At the Advanced Materials Show 2022, AZoM caught up with the CEO of Cambridge Smart Plastics, Andrew Terentjev. In this interview, we discuss the company's novel technologies and how they could revolutionize how we think about plastics.
At the Advanced Materials Show in June 2022, AZoM spoke with Ben Melrose from International Syalons about the advanced materials market, Industry 4.0, and efforts to move toward net-zero.
At the Advanced Materials Show, AZoM spoke with Vig Sherrill from General Graphene about the future of graphene and how their novel production technique will lower costs to open up a whole new world of applications in the future.
This product profile describes the Flex Raman Catalog.
This is the full list of rotary evaporators offered by IKA Werke.
This product from Alicona features Cobots, which consist of a collaborative 6-axis robot and optical 3D measuring sensors to provide user-friendly measurement automation.
This article provides an end-of-life assessment of lithium-ion batteries, focusing on the recycling of an ever-growing amount of spent Li-Ion batteries in order to work toward a sustainable and circular approach to battery use and reuse.
Corrosion is the degradation of an alloy caused by its exposure to the environment. Corrosion deterioration of metallic alloys exposed to the atmosphere or other adverse conditions is prevented using a variety of techniques.
Due to the ever-increasing demand for energy, the demand for nuclear fuel has also increased, which has further created a significant increase in the requirement for post-irradiation examination (PIE) techniques.
AZoM.com - An AZoNetwork Site
Owned and operated by AZoNetwork, © 2000-2022