The combustion temperature of harmful gas is very high, and the VOCs activity can be effectively reduced under the action of catalyst. Thus, the starting temperature is controlled within the range, which can save the cost of combustion, so it is called energy-saving equipment. If it is a traditional combustion equipment without catalyst, nitrogen oxides will be produced during combustion, which will also cause serious pollution to the environment. So what problems are encountered in the process of CO catalytic combustion furnace?

1. Frequent start and stop of equipment
Frequent start and stop of equipment is not a small problem, but it can also be solved by itself. For example, adjust the waste oil regulating valve, so that there will be no such phenomenon. If it is not possible to adjust to the status, please find a special person to repair it on the site.

2. Motor stopped
The developed stop operation, it means that the equipment can not work normally. Either the motor exceeds the compliance or the switch is delayed. In short, all problems caused by motor need to be adjusted in time.

3. The pump vibrates badly
This problem will not appear in the new CO catalytic combustion furnace, but since this happens, it is possible that the air in the burner is the reason, so it can be solved by fully venting. Usually, it is difficult to solve such problems in the process of combustion.

4. Equipment smoke heavily
Smoke indicates that the burning rate of the equipment is too high, and it needs to be handled in time. If the solid waste is too large and too much, it is easy to have such problems, but the problem is not too serious.

The temperature of CO catalytic combustion furnace is half of the common combustion temperature because there is no open fire. Naturally, there will be no nitrogen oxides, and no pollution to the environment.

 

Enter your question about this product